Four Wheeler Homepage: 4x4 Trucks, SUVs, & Off Road Vehicles Four Wheeler

Chevy Pickup Dumpbed Remove Solenoid

 
Chevy Pickup Dumpbed Remove Solenoid

Chevy Dumpbed Pickup Truck - Project Reject
11. With the pump assembly installed on the frame, the solenoid for the downward movement must be partially removed to install a 90-degree fitting onto the pump. Remove only the top portion as shown and the fitting will just clear. Install the pressure hose between the fitting and the hydraulic cylinder. Add three quarts of Dextron III ATF to the reservoir. View Related Article
Chevy Pickup Dumpbed Drivers Side Compare Chevy Pickup Dumpbed Pierce Sales Kit Chevy Pickup Dumpbed Hydraulic Cylinder Chevy Pickup Dumpbed Remove Bed Chevy Pickup Dumpbed Hinge Plates Chevy Pickup Dumpbed Rear Frame Chevy Pickup Dumpbed Hinge Arm
Chevy Pickup Dumpbed Hinge Bracket Finished Chevy Pickup Dumpbed Stiffener Plate Chevy Pickup Dumpbed Scissors Chevy Pickup Dumpbed Pump Assembly Chevy Pickup Dumpbed Remove Solenoid Chevy Pickup Dumpbed Pump Assembly Chevy Pickup Dumpbed Mount Hinge Arms
Chevy Pickup Dumpbed Bolt Hinge Arm Chevy Pickup Dumpbed Clips

 

Get Adobe Flash player