Four Wheeler Homepage: 4x4 Trucks, SUVs, & Off Road Vehicles Four Wheeler

Reader's Rigs Special - Mud Monsters of Florida

Five giants of goo from the Sunshine State

By Ken Brubaker
photographer: Ken Brubaker

 Dodge Ram Front Driver Side View

Do 4x4 owners modify their trucks differently depending on what area of the United States they 'wheel in? Clearly, North America contains many different types of terrain, and each creates its own obstacles to four-wheel-drive vehicles. Yet the question is, are there modifications that are universal to the four-wheeling world, or are they regional?

To answer that question, we introduce our "Trucks Of..." series, which will run every three or four months (or depending on how often we can sneak out of the office to visit these areas). In this special series we'll feature vehicles that provide insight into how folks in various regions build their trucks. Some will be trail toys, some will be daily drivers. While in the area, we'll also visit with a local 4x4 shop or two and see what's going on in the local tech scene. Of course, we'll also explore trails with a local club to see what obstacles lurk off the paved roads.

This month, we kick off with a visit to the state of Florida. The following five trucks offer an insight into the modifications required to reign supreme over the area's deep mud and serious water.

 2000 Jeep Wrangler Front Driver Side View

Scott Allen's Wrangler
A V-8-Powered mud plow

Florida mud has a way of sucking horsepower from even the hairiest engines. So you'll understand why Scott Allen of Ocala, Florida, did what he did to his 2000 Jeep Wrangler.

Opening the hood of this Solar Yellow beast reveals a Chrysler/Jeep 4.7L V-8. This 250hp engine sports a custom dual exhaust with high-flow catalytic converters and Flowmaster mufflers. The changeover from the stock 4.0L engine to the new V-8 required scores of custom parts, including significant modifications to a Dodge Dakota wiring harness. As you can imagine, the work didn't end there, as a Lakewood bellhousing was highly modified to allow the engine to be mated to a new NV4500 transmission (with custom fabricated flywheel and modified hydraulic clutch slave cylinder). Other drivetrain mods include an Atlas II transfer case, custom American Powertrain driveshafts (with beefy 1350 U-joints), a front high-pinion Dana 60 differential with Spicer axleshafts, a rear high-pinion Dana 60 differential with Strange Engineering axleshafts, Detroit Lockers front and rear, and 5.13 gears.


 2000 Jeep Wrangler Chassis View
A custom-built Dana 60 front axle contains a 5.13 ring-and-pinion, and traction is enhanced with a Detroit Locker. The front suspension is a modified Rubicon Express Long Arm Kit, and Doetsch Tech shock absorbers keep the ride smooth.
 2000 Jeep Wrangler Engine View
Underneath the hood lurks a 4.7L Chrysler/Jeep SOHC V-8 that builds 250 horsepower. Its performance is enhanced with dual exhaust and high-flow catalytic converters. Power is sent through a new NV4500 transmission, which features a Centerforce clutch, custom Lakewood bellhousing, and custom hydraulic clutch slave cylinder.

Scott then went to work creating a long-travel, flexy suspension, which is based on a modified Rubicon Express Long Arm conversion kit. A custom steering assembly was created using 1 1/8-inch diameter chrome-moly rods and rod ends. A Currie Antirock antiroll bar keeps the Jeep from being a handful at highway speeds while still ensuring full suspension travel off road, and Doetsch Tech shock absorbers help create a smooth overall ride. The Wrangler rolls on aggressive 38.5x16-15 Mickey Thompson Baja Claw tires, which are mounted on 15x10 Center Line aluminum Thruster wheels.

The Jeep features scores of functional exterior bolt-ons, including a Currie rear bumper/tire carrier/receiver hitch, Tomken 3-inch Rocker Skids and front bumper, Warn HS9500i winch, and Hella driving and foglights, while the interior of the Jeep sports a custom full rollcage, Permatech lining, a Realistic CB radio, Garmin GPS, Nextel cellular phone, modified center console, and Wet Okole seat covers.

With the help of Jeff Priest at Jeff's 4x4 in Ocala, Florida, it took Scott about 6 months to complete the buildup of this Wrangler, which is impressive when you consider the number of custom parts that were fabbed for the Jeep. The finished product is more than capable of handling the Florida terrain, and Scott uses it regularly on club outings with fellow members of the Ocala Jeep Club.


1  | 2  | 3  | 4  | 5  | Next
Get Adobe Flash player
Get FREE, up-front new car and truck pricing with no hassle.

Related Photos

Related Articles

 
2008 4 Wheel Jamboree Lima - Livin' Large In Lima
The Spring Jamboree Nationals always bring out the best in show rigs, monsters, and high flying... more
 
 
2008 Toyota Tundra Ivan Stewart Edition - Signature Series Shenanigans
With performance parts selected by the Baja legend himself, this Tundra boasts 504 hp under the... more
 
The Tale Of Three Tires - Hankook BFGoodrich Toyo
Hankook Sets Out To Prove The Dynapro Atm Against The Competition... more

 

Get Adobe Flash player