Want to see your vehicle in Readers' Rigs? Of course you do. So go ahead and send a description of everything you have done to your rig, and include a good photo of it. No, you don't need no stinking application.
Just go ahead and send it to:
Readers' Rigs, Four Wheeler,
6420 Wilshire Blvd.,
Los Angeles, CA 90048-5515.
Or, send your description and high-resolution digital photos to us via www.fourwheeler.com.
This unnamed reader says he loves running trails in his '69 Ford Bronco. He says everything on the rig is new, aftermarket, and built by himself and friends. For starters, he installed 35-spline Moser axleshafts and a Detroit Locker in the rear 9-inch axle. The front Dana 44 was upgraded with Warn shafts and hubs and ARB and CTM U-joints. He also built a full manual valvebody for the C4 automatic tranny. The transfer case is a Dana 20 which he has plans to change out soon. For power, he prepped a 351 Windsor with a Crower cam, rockers, Edelbrock intake manifolds, a Truck Avenger carburetor, and an MSD ignition system. He tells us this powerful setup spins 35-inch Goodyear MTRs without hesitation.
Vince Verneuille of Roseville, California, sent in this shot of his '89 Ford Bronco. The rig has a 351 V-8 sporting such upgrades as a K&N Intake, a Airaid Fuel Injection spacer, a JET Performance chip, Doug Thorley headers, and a Magnaflow 3-inch exhaust system. This healthy powerplant is mated to a Ford C6 automatic and a rebuilt Borg-Warner transfer case. Both axles are stock with 4.56:1 gearing and the rear houses a Truetrac limited slip. Other goodies include Warn premium manual locking hubs, a Pro-Comp 6-inch suspension lift, and 35-inch BFG All-Terrains on Pro-Comp wheels. A Warn 9.5ti winch is on standby in case Vince should stumble on a stuck Jeep.
Kyle Walker from Sierra Blanca, Texas, sent in this shot of his '00 Ford F-250. It's equipped with a set of 285/75-R16 BFG Mud-Terrain tires. Power is provided by a 7.3L Power Stroke diesel hopped up with a Banks Six Shooter. The rig also has a Banks exhaust system and exhaust brake. Kyle fabricated the flatbed and front bumper from scratch. He uses the truck mostly for work, but claims sometimes he finds himself just goofing around the farm like you see here.
Raymond Miller of DeSoto, Missouri, built this rig for mud-bogging fun. It has a small-block engine, a Turbo 350 transmission, and a divorce-mounted transfer case. Unique to this beast are a pair of Military axles featuring 5.88:1 gearing and massive 52-inch-tall tractor tires. Stripped down, this '79 Chevy weighs 4,600 pounds. Looks like fun to us.
The '00 Wrangler Sahara you see here belongs to Casey Trytko. It has a stock 4.0L engine that receives help from a K&N intake, a Borla header, a Flowmaster muffler, a JET chip, and a throttle-body spacer. Casey uses his TJ as a daily driver, so he stuck to a street-worthy set of 33-inch tires. The interior features a Tuffy security console, and a steel add-a-trunk lockbox.
John Tydingco sent in this shot of his '00 Toyota Tundra SR-5. John resides on the beautiful island of Guam. His rig sports a V-6 engine and stock drivetrain. He added a 3-inch body lift, a pair of 211/42-inch Sway-A-Way shocks up front, as well as a Pro Comp 111/42-inch add-a-leaf in the rear. John runs Lock-Rights in both axles and a set of Pro Comp Mud-Terrains provide the traction. We're not sure how much wheeling there is in Guam, but John's ride looks fun to us.
This '00 Chevrolet Blazer is owned by Paul Buckmaster from Shawnee, Kansas. The rig features a custom solid axle swap and 33-inch Trxus M/Ts mounted on Weld Outback wheels. The drivetrain consists of a stock 4.3L V-6, a 4L60E transmission, an NP233 transfer case, a GM 7.5 rear axle with a Lock-Right, and a Dana 30 high-pinion front axle. Other mods include a custom front bumper, a 2-inch body lift, and home-built rock sliders. Paul says the solid front axle swap was the best thing he ever did to the truck.