Four Wheeler Magazine covers 4x4 Trucks, SUVs, & Off Road Vehicles
Subscribe Four Wheeler Magazine today for only $10.00! Link to Four Wheeler Magazine Facebook Fan Page Sign up today at Four Wheeler for your personal car space

September 2006 Readers' Rigs - Custom 4x4 Trucks

Send us your rigs!

Want to see your vehicle in Readers' Rigs? Of course you do. So go ahead and send a description of everything you have done to your rig, and include a good photo of it. No, you don't need no stinking application. Just go ahead and send it to:

Readers' Rigs, Four Wheeler
6420 Wilshire Blvd.
Los Angeles, CA 90048-5515.


Or, send your description and high-resolution digital photos to us via www.fourwheeler.com.

1984 Dodge D50 Passenger Side View

Terry Henrich of Maple Valley, Washington, calls this truck the Mule. It's an '84 Dodge D50. Terry cut 36 inches off the frame to bobtail the truck, and he handbuilt a 15-inch IFS lift kit to clear 35-inch Goodyear MT/R tires. Terry also handbuilt the front and rear bumpers, nerf bars, and ladder bars. Terry says the Mule gets him wherever he wants to go. Not bad considering how stubborn mules can be.


2001 Jeep Wrangler Tj Passenger Side View

Wes and Nicole Stewart of Johnstown, Ohio, sent in this shot of their '01 Jeep TJ. It features a 3-inch Teraflex suspension lift with Skyjacker shocks, and 33-inch Baja Claws on 15x10 black steel wheels. This Jeep serves as Nicole's daily driver, so any 'wheeling typically has to happen on the couple's weekend camping trips.



1998 Ford Ranger Xlt Drivers Side View

This '98 Ford Ranger XLT belongs to Patrick Carr of San Diego, California. Underneath the stock sheetmetal is a stock drivetrain, an RCD 5-inch coilover conversion with Bilstein shocks, and a set of 35-inch BFG A-Ts mounted to a set of Weld Sidewinder wheels. For performance, Patrick added a K&N FIPK, a JET Chip, a Granatelli Motorsports MAF sensor, and a custom dual exhaust system.


1983 Toyota Pickup Front View

Jeff Koens of Antioch, California, wheels this '83 Toyota Pickup.The drivetrain features a 22RE engine, a stock manual five-speed transmission, a 5.00:1 transfer-case gearset, and stock axles. Jeff added a custom flatbed, rock sliders, and an All Pro 6.5-inch suspension lift. A set of 35-inch Goodyear MT/R tires provides the traction. Jeff claims the custom body work was done by Hollister Hills.


1996 Dodge Ram 4X4 2500 Front View

Parker Geisinger lives in Fresno, California. This is his tow rig. It's a '96 Dodge Ram 4x4 2500 with a 5.9L engine. The truck came with 4.10:1 gearing and a rear limited-slip. Parker added a Flowmaster Super 40 muffler, Chevy tow hooks, and of course, a set of 33-inch Interco Boggers.

Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!

*Please enter your username

*Please enter your password

*Please enter your comments
Comments:
Not Registered?Signup Here
(1024 character limit)
Four Wheeler