Four Wheeler Homepage: 4x4 Trucks, SUVs, & Off Road Vehicles Four Wheeler

129 0207 Flex09 Z

8: Scribe and cut the shift rod 51/2 inches from the end of the shaft. Insert 3/8-inch tubed spacer (being certain that the scribe marks are inline) then weld to produce a new shaft length of approximately 93/4 inches.
Installing Flex

 8: Scribe and cut the shift rod 51/2 inches from the end of the shaft. Insert 3/8-inch tubed spacer (being certain that the scribe marks are inline) then weld to produce a new shaft length of approximately 93/4 inches.  View Related Article

 

Get Adobe Flash player

Car Research Guide