Four Wheeler Homepage: 4x4 Trucks, SUVs, & Off Road Vehicles Four Wheeler

129 0308 Bump 03 Z

 
129 0308 Bump 03 Z

Big Bad Bumper
To install, remove the factory bumper and disconnect the splash pan from the bolt-on crossmember; then remove the crossmember, tow hooks and tie downs. Using a hacksaw, cut the ears off the bumper mount flange about 11/48 inch forward of the welded nut. After you've connected the turn signals, slide the new bumper into position and install the side bolts. Don't tighten yet. View Related Article
Toyota Tacoma Front Bumper View 129 0308 Bump 09 Z 129 0308 Bump 02 Z 129 0308 Bump 03 Z 129 0308 Bump 04 Z 129 0308 Bump 05 Z 129 0308 Bump 06 Z
129 0308 Bump 07 Z 129 0308 Bump 08 Z

 

Get Adobe Flash player