OR-Fab
What: Sheetmetal bumpers
Where:928/636-7080, p-a-g.net
Wares: Manufactured from 3/16-inch-thick steel plate, and includes 1/2-inch-thick steel mounting brackets and reinforced D-ring mounts/shackles. Non-winch design available.
Words: "Won't hinder your Jeep's steep approach angles, and the tapered design allows them to easily slide off large rocks and ledges with ease."
Wallet: Starts at $412
Rampage Products
What: Recovery front bumper
Where:951/277-4949, rampageproducts.com
Wares: Includes ground-level dual light receptacles, 3/16-inch steel plate, powdercoat finish, and two Clevis 1-inch D-rings.
Words: "You can run the bumper with or without the winch plate."
Wallet: Around $799
RECON Truck Accessories
What: Amber LED front fender and turn-signal lights
Where:877/37-RECON, gorecon.com
Wares: Includes smoked or clear lens, waterproof sealed units, and reinforced, high-impact plastic casings.
Words: "It's easy to get used to the ugly amber lenses and less-than-adequate amber light emitted by your factory-installed Jeep Wrangler."
Wallet: MSRP is about $99 for complete sets
Warrior Products
What: Stubby Bumper systems
Where:888/220-6861, warriorproducts.com
Wares: Get it with or without the winch plate. Standard with D-rings, and two brushguard options: full prerunner (forward slant) or prerunner center-hoop assembly only.
Words: "The bumper protects the front of the grille, while allowing greater wheel articulation and clearance from its shorter sides."
Wallet: Starts at $345
Run Cool Hood Louvers
What: Sixteen models of hood louvers/hood vents
Where:804/355-1758, hoodlouvers.com
Wares: Universal-fit, pop-rivet-on louvers that don't require removing, punching, or repainting the hood. Sizes include standard with nine slots and high-flow with 14. There's even an extra large with 23.
Words: "Cooler engines increase power, durability, and efficiency-an extra margin of reliability."
Wallet: Starts at $89 per set
Safari Straps
What: Extended Nets (window, cage, and long-cage versions)
Where:661/621-4486, safaristraps.com
Wares: Heavyweight and UV-/mildew-resistant polypropylene webbing.
Words: "The Extended goes all the way to the tailgate. Once installed, you don't have to remove it. It does not interfere with any top. No drilling required."
Wallet: Long-cage extended set as shown is $355
Warn Industries
What: Tube-style front and rear bumpers
Where:800/543-9276, warn.com
Wares: Made from 2-inch steel, and with black-powdercoat wrinkle finish.
Words: "The front bumper has the ability to mount any Warn midframe winch (except the M8274-50) using our JK winch plate."
Wallet: MSRP is $709
Mountain Off Road Enterprises (M.O.R.E.)
What: Front and rear fenders
Where:970/625-0500, mountainoffroad.com
Wares: Includes 1 3/4-inch x .120-wall round tubing and side-marker lights. Available in powdercoated black matte finish or bare steel.
Words: "Reuses the front inside skirt along with other provided mounting hardware to close off mud to the engine area."
Wallet: Starts at $995 per set