If you need more space for your gear, check out Synergy Suspension’s universal Baja Baskets. Baja Baskets have been designed to create more space, while holding your gear, coolers, spare parts, and luggage. Available in three sizes, each Baja Basket is manufactured from high-strength, 16-gauge material with the latest in CNC punch press equipment. The Baja Basket boasts a 300-pound carrying capacity and each Baja Basket is available in raw unfinished metal and can be easily installed with basic fabrication know-how on to your off-road vehicle, truck, or to your Jeep Wrangler JK using an available install kit.
Info: Synergy Suspension
What’s Your Vector, Victor?
The Vector Off Road GGR Cargo Platform nearly doubles the organized storage space in the rear of Wrangler JK four-doors. The GGR platform can be fitted with an optional cargo divider hoop kit, where a 48-inch off-road jack or aluminum divider panel can be mounted. Constructed of alloy steel, and mounted with billet roll cage brackets, the GGR is one stout piece of equipment. This platform comes standard with a black wrinkle powdercoat finish and all the necessary mounting hardware. It fits ’07-current Wrangler Unlimited JKs equipped with a hardtop, or wearing no top. All GGR Cargo Platforms are made in the USA and built to order.
Info: Vector Off Road
Looking for an affordable storage system for fuel or water? Daystar Cam Cans are durable 2.5-gallon containers available in red, green, or grey/blue and feature a unique cam mounting system to positively lock the containers to the mount, or each other. These cans were designed to fit Jeep and Toyota spare tires, as well as universal applications. The red fuel can is CARB-certified and the grey/blue can is designed for potable water. Best of all, they are made in the USA.
Lock and Load
Lockstraps Incorporated has announced the third generation version of its product, the Lockstraps G3. The G3 uses tougher locking carabiners, a stronger sliding clasp, and comes in a sealed clamshell package that can be set on a shelf or hung from a wall hook. Lockstraps G3s are built with a braided stainless steel cable embedded between double nylon straps. Tough galvanized steel rivets keep dual combination carabiner locks in place at both ends of the Lockstraps. The straps also incorporate a soft tie-extension to eliminate scratching. Users can change the combination of the locks with each use and can set their own personal combinations on either carabiner. The new G3 straps are 8.5-feet long, 1.5-inches wide, ¼-inch thick, and weigh 2.3 pounds each. They come backed with a 100-percent satisfaction guarantee.
Info: Lockstraps Inc.
Slide and Hide
ARB has launched its Outback Solutions Modular Roller Drawer Systems range, providing four-wheelers with an extremely versatile selection of products to suit a wide variety of uses and vehicles. The range consists of eleven modules across three styles (Drawer, Drawer with Roller Floor, and Roller Floor) in five available lengths. Roller Drawers are rated to carry 220 pounds spread evenly throughout the drawer and Roller Floors are rated to carry 165 pounds spread evenly over the top. Modules can be mounted in various combinations, including individually, side-by-side, and vertically. This system also provides the flexibility to change, rearrange, or add modules and accessories over time. Outback Solutions modules can also be fitted to non-traditional applications such as flat beds and trailers.
The Crewbed is a one-of-its-kind, fully stowable, truck bed for Jeep Wranglers. The Crewbed folds behind the back seat when not in use, but when the need arrives, it can be fully deployed in less than two minutes. Rated at 400 pounds of capacity, it can hold most furniture, mountain bikes, and even fullsized dirt bikes. No more bulky roof racks that are hard to load, no more racing home to pick up a trailer, and no more calling a friend with a truck to come help you. The Crewbed provides you with all the enjoyment and open-air fun of a Jeep with all the utility of a pickup.
Spyder Industries Black Widow headache racks are made of heavy-gauge steel and have a unique inner/outer frame made of rectangular tubing. The webbed insert is made of laser-cut sheet steel. Black Widow racks are customizable; allowing you to add many options such as lumber stops, tie-down loops, rear brake/turn LEDs, rear-facing lamps, strobe light mounts, and more.
Info: Spyder Industries