Four Wheeler Homepage: 4x4 Trucks, SUVs, & Off Road Vehicles Four Wheeler

Atlas 4sp Transfer Case



 Atlas 4Sp Transfer Case Shift Selector Fork
This little shift selector fork enables shifting between the reduction housing gearsets in the planetary housing. Notice how the two round recessed reliefs are separated by a groove where a hardened pin will sit. This pin becomes the wear surface for the shift selector detent. This little detail helps ensure the 4SP will always shift easily and properly.
 Atlas 4Sp Transfer Case Planetary Housing
Here is the planetary housing fully loaded with all the gearing that makes a standard Atlas II an Atlas 4SP. Notice the little lubrication galley that provides oil to the planetary housing (arrow). As oil is slung up by the internal gears in the main part of the case, this little gutter directs oil to the planetary housing.
 Atlas 4Sp Transfer Case Selector Clog
Here you can see how the planetary shift fork fits on the selector cog before the planetary housing was installed.
 Atlas 4Sp Transfer Case Plastic Removable Caps
Once the planetary housing is bolted to the case, all that's left to do is bench-test the unit and seal it up for shipping. Little plastic removable caps are used to ensure nothing can contaminate the case during shipment.

Prev  | 1  | 2  | 3
Get Adobe Flash player
Get FREE, up-front new car and truck pricing with no hassle.

Related Photos

Related Articles

 
How Steering Works
If you’re planning to go up in tire size and/or lift your suspension, don’t forget to put... more
 
Tips for Improving the Brakes on Your Truck
Stock trucks stop fairly well. But add a lift, bigger tires, and several hundred pounds in bumpers,... more
 
A Novice’s Guide to Audio
Read About How To Install Some Car Audio Components.... more
 
A California Avalanche That's Red and Ready
There was no shortage of modified Chevy Avalanches at the 2001 SEMA show in Las Vegas, but we spun... more

 

Get Adobe Flash player