Four Wheeler Homepage: 4x4 Trucks, SUVs, & Off Road Vehicles Four Wheeler

1979 Chevrolet K20 Install Backing Plate Over Spindle

 
1979 Chevrolet K20 Install Backing Plate Over Spindle

Dana 44 High Steer Conversion - Knuckle Up
We installed the arms and cone washers before painting the whole assembly to prevent rust. Next, the backing plate was reinstalled over the spindle. View Related Article
1979 Chevrolet K20 Old Steering Setup Dana 44 Conversion Ott Industries Steering Arms Dana 44 Conversion Moog Tie Rod Ends And Drag Link Ends Dana 44 Conversion Passenger Side Knuckle 1979 Chevrolet K20 Frontend 1979 Chevrolet K20 Remove Hub Brake Caliper Brake Rotor Spindle 1979 Chevrolet K20 Remove Upper And Lower Ball Joint Nut
1979 Chevrolet K20 Remove Pitarm And Steering 1979 Chevrolet K20 Knuckles 1979 Chevrolet K20 Tighten Lower Ball Joint 1979 Chevrolet K20 Install Studs 1979 Chevrolet K20 Install Backing Plate Over Spindle 1979 Chevrolet K20 Install Brake Rotor And Hub 1979 Chevrolet K20 Installed Arms
1979 Chevrolet K20 Straighten Knuckles Test Fit Tie Rod 1979 Chevrolet K20 Tie Rod End And Drag Link End 1979 Chevrolet K20 Ott Arms 1979 Chevrolet K20 Finished Frontend

 

Get Adobe Flash player

Car Research Guide