Four Wheeler Magazine covers 4x4 Trucks, SUVs, & Off Road Vehicles
Subscribe Four Wheeler Magazine today for only $10.00! Link to Four Wheeler Magazine Facebook Fan Page Sign up today at Four Wheeler for your personal car space
 | 
|  
 
1979 Chevrolet K20 Install Brake Rotor And Hub
Dana 44 High Steer Conversion - Knuckle Up
New bearings were installed in the hub and liberally greased with synthetic grease. The brake rotor and hub were then installed on the spindle. The first spindle nut was tightened until the wheel would not turn and then backed off. The second spindle nut was then tightened to 85 lb-ft. View Related Article
1979 Chevrolet K20 Old Steering Setup Dana 44 Conversion Ott Industries Steering Arms Dana 44 Conversion Moog Tie Rod Ends And Drag Link Ends Dana 44 Conversion Passenger Side Knuckle 1979 Chevrolet K20 Frontend 1979 Chevrolet K20 Remove Hub Brake Caliper Brake Rotor Spindle 1979 Chevrolet K20 Remove Upper And Lower Ball Joint Nut
1979 Chevrolet K20 Remove Pitarm And Steering 1979 Chevrolet K20 Knuckles 1979 Chevrolet K20 Tighten Lower Ball Joint 1979 Chevrolet K20 Install Studs 1979 Chevrolet K20 Install Backing Plate Over Spindle 1979 Chevrolet K20 Install Brake Rotor And Hub 1979 Chevrolet K20 Installed Arms
1979 Chevrolet K20 Straighten Knuckles Test Fit Tie Rod 1979 Chevrolet K20 Tie Rod End And Drag Link End 1979 Chevrolet K20 Ott Arms 1979 Chevrolet K20 Finished Frontend
Get Adobe Flash player
Four Wheeler