2002 Ford Excursion Powerstroke Cummins Diesel Engine Swap - Swap Fever
|
16. To mount the shroud to the radiator, Zuccarello modified the factory Ford passenger-side upper radiator bracket (shown). This bracket normally holds the Ford coolant bottle and the jack system. About 4 or 5 inches of length was removed from this bracket. The other driver-side upper bracket was left stock. Zuccarello plans on fabricating lower shroud brackets that will fit in the existing slots in the Ford radiator. The factory Ford coolant bottle would no longer fit, so a Canton aluminum reservoir is being installed on custom mounts. View Related Article
|
|