Four Wheeler Homepage: 4x4 Trucks, SUVs, & Off Road Vehicles Four Wheeler
Get Adobe Flash player

Armed For Duty II - 2009 Land Rover LR3

Upfitting An LR3 For Trail Service
From the January, 2010 issue of Four Wheeler
By Robin Stover
Photography by Robin Stover
2009 Land Rover Lr3 Before
Before: In stock form, this... 
   
  read full caption
2009 Land Rover Lr3 Before
Before: In stock form, this Land Rover might spank the regular mall-cruising luxury SUV. For Hollister Hills, this stocker's capabilities were tailored and improved to prepare it to meet the intense demands put forth by rescue operations in remote areas.
Saavy readers will remember the September '09 issue, where we first showcased some hefty bolt-on upgrades for a 2000 Land Rover Discovery. This time around, the park rangers at Hollister Hills turned us loose on the newest member of their fleet: A 2009 Land Rover LR3 loaned to the park by Land Rover North America. Rangers tell us that this LR3 has proven to be the most versatile vehicle in their fleet-with its nimble size and terrain-conforming air suspension, it simply gets the job done better than most other factory 4x4s can. While that's no surprise to us, we were astonished to learn that the LR3 is often used to patrol the hard-to-reach "motorcycle-only" portions of the park, simply because the rangers don't have to worry about it getting stuck on the tight and often overgrown trail access roads. They also tell us they wish all of their patrol vehicles came with such surefooted capability. It's true-right out of the box, Land Rovers are quite capable in the dirt. However, when subjected to a rigorous regimen of trail work, as is the case with most of Hollister's fleet, even the LR3's factory-engineered trail attributes can be improved by adding a combination of bolt-on products designed to add function and utility to the sharp-looking LR3. Check it out.

2009 Land Rover Lr3 Discovery Winch
Disco Update
We goofed: In the September 2009 issue, we showed you a Warn XD9000i winch as it was installed inside an attractive ARB bumper on a 2000 Land Rover Discovery. What we didn't know at the time was that ARB recommended a specific style of winch for their bumper system. Mistakenly, we installed a winch that was already on the vehicle and was never intended to work with the ARB bumper. Subsequently, we found it difficult to access the remote control plug and winch engagement lever. Later, the mistake was pointed out to us. Had we read the instructions more closely, we would have found ARB's specific recommendations to use a winch with a remote-mounted solenoid pack, like the 9.5 xp shown above. On that note, we wanted to update everyone on the Discovery upgrades shown in Part One of this series; the vehicle is still roaming the many trails of Hollister Hills each and every day. We're told that the newly installed upgrades have performed flawlessly and without issue thus far. The upgrades have also given the vehicle a newfound favoritism among park rangers. As for the LR3s upgrades, check out the next edition of "Armed for Duty" in the coming months.

2009 Land Rover Lr3 Fender Flare
To start, Hollister's head... 
   
  read full caption
2009 Land Rover Lr3 Fender Flare
To start, Hollister's head mechanic, Gilbert Mayorquin, positioned the vehicle securely on a lift. Here you can see Mayorquin beginning the process of removing the front plastic fender flares. This entailed releasing several plastic clips and removing two small screws, one of which is hidden and only accessible from inside the headlight opening.
2009 Land Rover Lr3 Stock Front Bumper
With the flares removed, Mayorquin... 
   
  read full caption
2009 Land Rover Lr3 Stock Front Bumper
With the flares removed, Mayorquin focused on removing the factory plastic bumper from the vehicle. A series of small bolts and plastic clips retain the bumper to the core support. Once these were located, the process was very easy to complete.
2009 Land Rover Lr3 Colision Brace
After the bumper was removed,... 
   
  read full caption
2009 Land Rover Lr3 Colision Brace
After the bumper was removed, the underlying collision brace was unbolted from the chassis. This allows placement of the new Rovertym bumper brackets where each frame rail terminates.
2009 Land Rover Lr3 Washer Fluid
Next, each bumper bracket... 
   
  read full caption
2009 Land Rover Lr3 Washer Fluid
Next, each bumper bracket was mounted to the vehicle. These brackets were very stout and enable a solid attachment point for the new all-steel bumper.
2009 Land Rover Lr3 Washer Fluid
Due to space limitations,... 
   
  read full caption
2009 Land Rover Lr3 Washer Fluid
Due to space limitations, the windshield washer reservoir had to be relocated to a space under the hood. Here you can see Mayorquin disassembling the unit.
2009 Land Rover Lr3 Winch Bumper
With each mounting bracket... 
   
  read full caption
2009 Land Rover Lr3 Winch Bumper
With each mounting bracket loosely attached to the chassis, Mayorquin attached the bumper to the vehicle. Next, he checked to ensure proper bumper alignment before tightening up each of the 18 anchoring bolts.

1  | 2  | Next

Related Photos

2009 Land Rover Lr3 Warn Winch 2009 Land Rover Lr3 Warn Lights
2009 Land Rover Lr3 Fender Flare Trimming 2009 Land Rover Lr3 Winch Hook

Related Articles

2000 Land Rover Discovery Build - Armed For Duty
We Build A Park Ranger's Dream Ride... more
2008 Land Rover LR2 Morocco - Mogador Backroads
Far off the beaten tourist path, coastal Morocco offers sand, surf, and plenty of rocky trails to... more
Land Rover's G4 Challenge - Part II
"It's hard to believe that yesterday (or was it the day before?) we were skiing," exclaimed an... more
Land Rover Discovery 3 Experience Argentina - Road To The Clouds
An Argentine Adventure In Four-Wheel Drive... more

More Related Content