For the rear suspension we designed and had Rob Bonney Fabrication cut these lower control arm mounts. We would have liked to tuck the arms up higher, but with the Ultimate Dana 60 axlehousings being as large as they are, we left them just below the framerails for the suspension antisquat numbers to be where we want them. With a little bit of research we figured out that Skyjacker JK Unlimited lower long arm control arms would be about the same length as the Rover’s factory rear control arms. Also these parts are adjustable and use replaceable and or rebuildable ends; that’s good for when parts wear out. For the axle end of the lower control arm we used a pair of 3-inch, 10-degree axle-mount link brackets.