With the Cepek brackets mounted it was time to get some clearance for the control arms to travel up. The major problem we ran into is the body-mounting bracket off the frame. This got in the way of the upper control arm and is the reason why no one but Dick Cepek has come out with a complete long arm kit for the '94-'01 Dodges. Luckily, Dick Cepek found a way around that by supplying reinforcements that are supposed to bolt into the body-mount bracket after it has a 3-inch circular hole cut in it for arm clearance. Both Van Gaale and Bishop each decided to use their own method of removal (See following image as well).