New 4Wheel Products - November 2014

The Latest For Your 4x4

ManufacturersPhotographerTom MorrWriter

Rampage JK Recovery Bumpers
Rampage Products JK Recovery Bumpers offer vehicle protection and recovery assistance. Front and rear receptacles accept factory driving lights and maximize light distribution. The raised bumper edges align with the factory fender flares, allowing increased suspension articulation. Two D-rings and a winch plate are included with the front bumpers. Installation is no-drill.
Information: Rampage Products

ATX Ravine Wheel
The AX194 Ravine is ATX’s latest off-road style. It features five spokes and a beadlock look. The Teflon coating repels dirt and eases cleaning. The Ravine is hub-centric and has a reinforced rear flange for strength, as well as release pockets to discourage water accumulation. Available finishes are black or matte gray, with contrasting zinc-plated bolts. Initial sizes are 17x8.5, 17x9, and 18x8.5, in five- and six- lug applications.
Information: ATX Wheels

Classic Industries Repro Chevy Truck Tachs
Classic Industries now offers reproduction tachometers for ’73-’87 Chevrolet and GMC trucks (V-8 applications). They’re manufactured to original specifications but with updated electronics for improved accuracy. Each gauge features a gloss black face, silk-screened markings with the correct fonts, and bright orange needles. Three part numbers cover the application range.
Information: Classic Industries

BDS F-150 6-Inch Coilover Lift
The new BDS kit accommodates the revised strut-mount design on the ’14 F-150. The front utilizes 1⁄4-inch steel crossmembers, differential relocation brackets, a differential skidplate, ductile iron steering knuckles, and Fox 2.5 remote reservoir coilovers with Eibach coils. Also included are bumpstop extensions, sway bar relocation brackets, new alignment cam bolts, and a billet aluminum front driveshaft spacer. The rear uses a 5-inch block and Fox 2.0 shocks. This kit gives clearance for up to 37-inch tires and is reportedly FMVSS 126 compliant.
Information: BDS Suspension

Omix-Ada Scrambler Bodies
New replacement steel body tubs for the ’81-’86 Jeep CJ-8/Scrambler are now available from Omix-Ada. These reproduction bodies are officially licensed authentic Mopar restoration products and come embossed with the authorized Jeep logo. Tubs are shipped ready to paint, preassembled and retaining all major factory mounting locations. Construction is 18-gauge steel for the front and rear floor panels with 16-gauge steel for side and tail panels.
Information: Omix-Ada

Flex-A-Lite Cooler Cover Guards
Flex-a-lite now offers aluminum cover plates to protect the company’s Translife oil coolers from rocks and debris. These USA-made cover guards are formed and punched from 1⁄8-inch aluminum and are engineered to allow maximum airflow. They securely mount on Translife oil coolers using the included Gator Clips. The covers can be painted black if desired to hide the cooler from being seen through the grille.
Information: Flex-a-lite

Icon Ram HD Stabilizers
To help control larger-than-stock tires on ’09-current Ram 2500/3500 trucks, Icon offers a direct-replacement heavy-duty steering stabilizer. This damper is based on the corrosion-resistant Icon 2.0 Aluminum Series shock absorber line. It was specifically tuned to compensate for the additional weight of larger wheels and tires. Features include a floating piston, a 5⁄8-inch shaft, a boot, and a rebuildable/revalvable design.
Information: Icon Vehicle Dynamics

Road Armor JK Stubby
Road Armor’s new bumper includes a recessed mount for a 10-inch LED bar. One-piece welded construction uses 3⁄16-inch hot rolled steel with 1⁄4-inch-thick frame mounts. The built-in winch plate accommodates up to 12,500-pound winch, including a Warn Powerplant. Shackle mounts are included.
Information: Road Armor

Smittybilt Gen2 X2O Winches
Smittybilt upgraded its waterproof X20 line with cooler-operating braking and a new 6.6hp series-wound motor, replacing the former 5.5hp unit. The motor is coupled to three-stage planetary gears engineered to maximize pulling power and accelerate line speed. New options include different mounting locations for the IP68-rated waterproof 500-amp solenoid and a winch controller, which can be plugged into the winch or operated remotely. Models range from 10,000 to 17,500 pounds. Steel cable and roller fairlead are included; the 10,000 and 12,000 Smittybilt X20 winches are also available in Comp Editions with synthetic line and a hawse fairlead (shown).
Information: Smittybilt

Edelbrock Universal EFI Sump Fuel Kit
Edelbrock’s new kit is designed to provide the fuel pressure required to run EFI in vehicles originally equipped with a low-pressure carbureted fuel system. The self-contained system is engineered for easy installation under the hood of any vehicle. Edelbrock delivers a constant fuel pressure without requiring a fuel return line. The existing fuel tank and low-pressure pump can be retained. The goal is to eliminate fuel starvation caused by low fuel level in a nonbaffled tank. Two versions are available: 58 psi and 49 psi. Each kit includes the fuel sump tank with high-pressure pump and regulator preinstalled, wiring harness, mounting bracket, hose, fittings, and all necessary hardware.
Information: Edelbrock

Lazer Star LX LED Bars
The Lazer Star LX line is available in lengths ranging from 6 to 50 inches. The aluminum housings are sealed for IP68 water resistance. Mounting uses an adjustable slide-trac system. Beam choices are spot, flood, or combo. Cree LEDs with 50,000-hour lifespans are used. Models are the 10-watt Discovery (1,000 rated lumens per LED), 3-watt/double-row Endeavour, and slim-bodied Atlantis. Options include tube clamps and strobing for EMS applications.
Information: Lazer Star Lights

Related Articles